{"id":3606,"date":"2026-10-21T18:43:54","date_gmt":"2026-10-21T10:43:54","guid":{"rendered":"http:\/\/www.sasthagodown.com\/blog\/?p=3606"},"modified":"2026-10-21T18:43:54","modified_gmt":"2026-10-21T10:43:54","slug":"can-a-tow-truck-tow-a-vehicle-that-has-been-in-an-accident-4e19-a716c1","status":"publish","type":"post","link":"http:\/\/www.sasthagodown.com\/blog\/2026\/10\/21\/can-a-tow-truck-tow-a-vehicle-that-has-been-in-an-accident-4e19-a716c1\/","title":{"rendered":"Can a tow truck tow a vehicle that has been in an accident?"},"content":{"rendered":"

If you\u2019ve ever sat on the side of the road staring at a mangled car that just got hit by another vehicle, a tree, or a guardrail, and wondered, \u201cCan a tow truck tow a vehicle that has been in an accident?\u201d you\u2019re not alone. For over a decade, I\u2019ve run a local tow truck supply business\u2014we sell, customize, and service flatbeds, wheel-lift units, and heavy-duty wreckers for independent tow operators, roadside assistance companies, and even municipal public works departments. In that time, I\u2019ve heard every question from first-time tow operators panicking over a rolled sedan to city fleet managers wondering if their new wrecker can handle a crash-damaged semi. The short answer is yes, but it\u2019s not as simple as hooking a cable to a bummer and hauling off. That\u2019s where most people\u2014and even some new tow drivers\u2014get tripped up. Today, I want to break down exactly how we approach accident vehicle towing, the science that makes it (sometimes) safe, and why choosing the right equipment matters more than you think. Tow Truck<\/a><\/p>\n

<\/p>\n

First, let\u2019s get one myth out of the way: all tow trucks can handle accident damage, but not all accident-damaged vehicles can be towed. Wait, that\u2019s a flip, I know. Let\u2019s clarify. When a car crashes, damage can range from a broken taillight to a crumpled frame that\u2019s shifted, broken axles, or a wheel that\u2019s bent so bad it\u2019s torn free from the hub. Each of these issues changes how you attach a tow truck and how you move the vehicle\u2014if you get it wrong, you could cause more damage, or worse, turn a roadside cleanup into a hazard for bystanders. I remember a call from a local tow driver about five years ago, new to the job, who tried to hook a front-wheel-drive sedan with a bent front axle using a standard two-wheel dolly. The dolly only held the rear wheels, so when he pulled, the front half of the car dragged on the asphalt, grinding the axle and the oil pan into bits, and spilling 10 quarts of oil across a busy highway on-ramp. That wasn\u2019t the worst part\u2014because the axle was bent, the steering rack was also damaged, and when the car dragged, the steering wheel locked up, making it lurch sideways into oncoming traffic. We got the oil cleaned up, the driver cited for improper towing, and we later sold him a custom wheel-lift unit with frame attachments. He still calls me now to say that unit saved his business a hundred times over.<\/p>\n

So, what makes towing an accident vehicle different from towing a dead car that just won\u2019t start? Let\u2019s start with the vehicle\u2019s integrity. If a car\u2019s frame is unbroken, all four wheels are intact, and the steering still works (or can be manually unlocked by disconnecting the steering column, a trick every driver should know), then a standard flatbed tow is usually the go-to option. Flatbeds work by tilting their hydraulic bed so the drive or all four wheels roll up onto it, then securing them with wheel nets, straps, and frame-mounted chains. This is the safest method because it keeps the entire car off the road, eliminates dragging, and reduces stress on the damaged parts. For light-duty accidents\u2014say, a fender bender where the only damage is to the bumper and hood\u2014this is straightforward. The tow driver just has to make sure the straps are tight, the wheels are centered, and any broken glass or loose parts are covered so they don\u2019t fall off during transport.<\/p>\n

But what if the frame is bent? Or a wheel is broken off entirely? Or the car is so crumpled it can\u2019t be safely driven onto a flatbed? That\u2019s when you need specialized tow equipment, and that\u2019s where our business comes in. We don\u2019t just sell standard units\u2014we customize them for crash scenarios. For example, a wrecker with a heavy-duty underlift (also called a wheel-lift) isn\u2019t just for moving parked cars in parking lots. Underlifts slide under the frame of the vehicle, attach to the factory frame points (which are reinforced for towing, even in crash-damaged cars), and lift the vehicle by its frame, not its wheels or bumpers. That\u2019s perfect if the wheels are damaged, the frame is slightly bent, or the car is too low to get a flatbed under. I worked with a tow operator out of Chicago last year who was called to a multi-car pileup on I-90. One of the cars was a compact sedan that had been rear-ended so hard its rear axle was completely detached, lying in the median. The driver tried to use a flatbed, but the rear of the car was too low to tilt the bed under it without hitting the ground. We\u2019d sold him a 12-ton underlift a few months prior, and that\u2019s what he used. He slid it under the front frame, lifted the car just enough to clear the ground, hooked a strap to the remaining stub of the rear axle to keep it from dragging, and hauled it to the impound lot in one trip. That would have been impossible with a standard flatbed or tow dolly.<\/p>\n

Now, let\u2019s talk about the science of towing damaged vehicles, because it\u2019s not just guesswork. Every tow unit we sell is rated for weight, and every damaged vehicle has a maximum tow weight based on its condition. For example, a 5,000-pound sedan that\u2019s intact has a tow limit of 5,000 pounds, but a 5,000-pound SUV that\u2019s rolled onto its roof and has a bent frame might only be towable at 3,500 pounds because the frame integrity is compromised. If you exceed that limit, you risk bending the wrecker\u2019s frame, snapping the cables, or dropping the vehicle mid-tow. We actually worked with a fleet manager for a regional roadside assistance company that tried to save money by buying used wreckers rated for 10,000 pounds for towing 8,000-pound pickup trucks that had rolled. After three incidents where the wreckers\u2019 underlifts bent during transport, they came to us to re-rate their entire fleet and add frame reinforcement. That\u2019s the kind of thing we deal with every day\u2014knowing the load capacity, understanding frame stress, and making sure the equipment is matched to the job.<\/p>\n

Another key point: hidden damage. When a car is in an accident, you can\u2019t always see every broken part. A rear-end collision might crack the fuel tank, or a side-impact crash might damage the steering column or brake lines. If you tow the car without securing those parts, you could leak fuel, brake fluid, or transmission fluid, creating a fire hazard or making the vehicle impossible to drive once it\u2019s at the lot. I always tell our customers that the first step when arriving at an accident scene is a quick visual check, then a secondary check under the vehicle, around the wheels, and inside the cabin to look for loose parts or leaks. If there\u2019s a fuel leak, you have to use a fire-resistant strap to secure the tank, or choose a towing method that puts less stress on the tank. If the brake lines are damaged, you have to tow the vehicle with the brakes released, which means making sure the wheels can roll freely without locking up. Most new drivers skip this step, and that\u2019s where mistakes happen.<\/p>\n

What about the exceptions? Are there any accident vehicles you can\u2019t tow? Absolutely. If a vehicle is so damaged that its frame is completely broken, or it\u2019s on fire, or has a fuel leak that\u2019s too severe to safely secure, then it\u2019s not safe to tow. In those cases, you need a mobile crash crane to lift the vehicle, or a heavy-duty wrecker to disassemble it on-site before hauling it away. We also handle a lot of custom orders for these scenarios\u2014tow operators who specialize in heavy-duty accidents like semi-truck crashes need wreckers with 50-ton or even 100-ton lifting capacity, and we build those with reinforced booms and heavy-duty underlifts designed to handle the weight of a semi that\u2019s crumpled after a crash. I remember a time last winter, a semi rolled off an interstate exit ramp in Minnesota, spilling 40,000 pounds of grain all over the road. The truck\u2019s cab was crushed, and the trailer was bent so bad it couldn\u2019t be moved with a standard wrecker. We worked with the tow company to build a custom 75-ton wrecker with a rotating boom that could lift the semi and set it on a lowboy trailer, instead of trying to tow it with a standard unit. That job took three days, but it would have been impossible with off-the-shelf equipment.<\/p>\n

Now, let\u2019s talk about what we, as a tow truck supplier, do to make accident towing safer and easier. It\u2019s not just about selling a truck\u2014it\u2019s about education, customization, and ongoing support. When a tow operator buys a unit from us, we don\u2019t just drop it off and leave. We train them on how to use it for accident scenarios, how to adjust the straps and underlift attachments for bent frames, how to spot hidden damage before hooking up, and how to read the load rating charts for their specific unit. We also keep a stock of spare parts for wrecker booms, underlift arms, and straps, because when you\u2019re dealing with accident scenes, things break. Last year, a tow driver called us at 2 a.m. from a crash scene on a remote highway in Oregon, where his underlift\u2019s hydraulic line had snapped while lifting a rolled truck. We drove 3 hours to meet him with a replacement line and a technician, and we had him back on the road in 45 minutes. That\u2019s the kind of service that matters, because when someone\u2019s life is on hold because of an accident, you don\u2019t have time to wait for parts or a new unit.<\/p>\n

I also want to address a common misconception among regular people, not just tow operators: when you call for a tow after an accident, you can ask for a specific type of unit. If you know your car has bent frame or a broken wheel, don\u2019t just ask for a tow truck\u2014ask for a wrecking unit with an underlift, because that will be safer for your car. We\u2019ve had customers come to us after their accident, saying the tow driver hooked their car with a two-wheel dolly and damaged the axle even more, because they didn\u2019t ask for the right equipment. It\u2019s your car, and you have a right to make sure it\u2019s being handled properly.<\/p>\n

At the end of the day, the question of whether a tow truck can tow an accident vehicle boils down to two things: the condition of the vehicle and the right equipment. For almost every accident scenario, there\u2019s a tow setup that can safely move the vehicle without causing more damage or creating a hazard. But it takes the right knowledge, the right equipment, and the right training to pull it off. That\u2019s what we focus on\u2014making sure tow operators have the tools and information they need to get the job done right, every time.<\/p>\n

<\/p>\n

If you\u2019re a tow operator looking to upgrade your equipment, a fleet manager needing to customize your units for accident response, or even a roadside assistance company looking to add specialized wreckers to your fleet, we\u2019re here to help. We don\u2019t just sell tow trucks\u2014we build solutions for the tough jobs, like accident towing, that demand more than off-the-shelf gear. Reach out to us to discuss your specific needs, whether you\u2019re handling light-duty fender benders or heavy-duty semi crashes, and we\u2019ll help you find the right equipment to get the job done safely and efficiently.<\/p>\n

Dump Truck<\/a> References:<\/p>\n

    \n
  1. National Highway Traffic Safety Administration. (2021). Towing Safety Guidelines for Crash-Damaged Vehicles. U.S. Department of Transportation.<\/li>\n
  2. International Tow Truck Operators Association. (2022). Best Practices for Accident Vehicle Towing and Securement. ITOTA Technical Bulletin Series.<\/li>\n
  3. Society of Automotive Engineers. (2020). Load Rating Standards for Wreckers and Underlift Tow Units. SAE International Journal of Commercial Vehicles.<\/li>\n
  4. Federal Motor Carrier Safety Administration. (2021). Heavy-Duty Towing and Recovery Procedures for Commercial Vehicles. FMCSA Regulation 393.107.<\/li>\n<\/ol>\n
    \n

    Shandong Huajiang Automobile Trading Co., Ltd.<\/a>
    As one of the most professional tow truck manufacturers and suppliers in China, we also support customized service. Please feel free to buy high quality tow truck for sale here from our factory. For price consultation, contact us.
    Address: Industrial Park, Quanpu Town, Liangshan County, Jining City, Shandong Province
    E-mail: 18253772888@163.com
    WebSite:     https:\/\/www.hjtrailer.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    If you\u2019ve ever sat on the side of the road staring at a mangled car that … Can a tow truck tow a vehicle that has been in an accident?<\/span>Read more<\/a><\/p>\n","protected":false},"author":509,"featured_media":3606,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3569],"class_list":["post-3606","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-tow-truck-46be-a75b7c"],"_links":{"self":[{"href":"http:\/\/www.sasthagodown.com\/blog\/wp-json\/wp\/v2\/posts\/3606","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.sasthagodown.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.sasthagodown.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.sasthagodown.com\/blog\/wp-json\/wp\/v2\/users\/509"}],"replies":[{"embeddable":true,"href":"http:\/\/www.sasthagodown.com\/blog\/wp-json\/wp\/v2\/comments?post=3606"}],"version-history":[{"count":0,"href":"http:\/\/www.sasthagodown.com\/blog\/wp-json\/wp\/v2\/posts\/3606\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.sasthagodown.com\/blog\/wp-json\/wp\/v2\/posts\/3606"}],"wp:attachment":[{"href":"http:\/\/www.sasthagodown.com\/blog\/wp-json\/wp\/v2\/media?parent=3606"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.sasthagodown.com\/blog\/wp-json\/wp\/v2\/categories?post=3606"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.sasthagodown.com\/blog\/wp-json\/wp\/v2\/tags?post=3606"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}